Top hat furnace - HB

stiahnuť brožúru Produktový list PDF


HB 13/80

The HB top hat furnace range has an automatically operated vertically moving hood for heat treatment in air. The moving hood design allows samples to be accessed from three sides. The HB can be equipped with CrFeAl heating wires up 1300 °C or with MoSi2 heating elements for temperatures up to 1800 °C.

The HB hood furnaces are available with usable volumes of 80 to 514 litres with the inner space being rectangular in design and the base plate having a convenient height of 750 mm. The hood moves up and down automatically to load and unload the sample.

All debinding applications require the use of an optional afterburner. The afterburner is driven by propane gas and compressed air to burn any evaporating binder.

Carbolite Gero specializes in custom designed furnaces and can also create a customised version of the HB to accommodate specific heat treatment needs. It is possible to equip a gas circulating system to improve temperature uniformity. Several sample thermocouples can be inserted into the furnace chamber to monitor and test the temperature profile. Through the use of a serial interface, the thermocouple data is logged at predefined intervals for evaluation.

The furnace is operated manually with a Eurotherm controller. Other controllers are available upon request.

Príklady aplikácií

annealing, keramické vstrekovacie tvarovanie, odplyňovanie, odstraňovanie pojiva, odstraňovanie spojenia vo vzduchu, spekanie, spekanie vo vzduchu, sušenie, sublimácia, syntéza, temperovanie

Štandardná výbava

  • 1300 °C, 1600 °C, 1700 °C & 1800 °C maximum operating temperatures
  • Carbolite Gero 3216CC controller with single ramp to set point and process timer
  • From 80 to 514 litre capacities
  • FeCrAl wire heating elements for 1300 °C models
  • High quality molybdenum disilicide heating elements for 1600 °C, 1700 °C and 1800 °C models
  • Pokrokový žiaruvzdorný interiér, používaný v kombinácii s energeticky účinnou slabou vrstvou tepelnej izolácie

Možnosti (uveďte pri objednávke)

  • Dostupná je široká rada digitálnych regulátorov, multi segmentových programátorov a ústrední. Tieto pece môžu byť vybavené komunikačným rozhraním RS232, RS485 alebo Ethernetom
  • Ochrana proti prehriatiu (odporúčame najmä pre ochranu vzácnych materiálov a pri bezobslužnej prevádzke)
  • Other sizes on request
  • Gas inlet for operation under modified atmosphere (not gas tight)
  • Afterburner for debinding applications

Technical details

View inside of the HB Hood Furnace
  1. heating elements
  2. ceramic fibre insulation
  3. bottom plate in 750 mm height
  4. automatic moving hood
  5. location of the rotameter
  6. bottom heater only for CrFeAl heating elements

Technické zmeny a chyby sú vyhradené